Sennheiser HME 27 Professional Broadcast Headset With Electret Microphone

Share

The Sennheiser HME 27 invites the Broadcast Commentators and Audio Engineers to experience the highest level of wearing comfort. HME 27 headphones have a closed and circumaural earcup design to provide a high passive attenuation but, nevertheless, unusually lightweight and comfortable to wear over long working hours. Soft circumaural earpads ensure a comfortable fit. The headset is equipped with the automatically opening two-piece headband, hence no pressure on the sensitive fontanelle. For those users who still prefer a conventional headband, a wide headband padding is included that converts the two-piece headband into a compact single piece.

Sennheiser HME 27 - Features:

• Highest wearing comfort due to the lightweight circumaural and split-headband design (no pressure on the sensitive fontanelle)
• Accurate and linear sound reproduction for very demanding monitoring
• Pre-polarized condenser microphone with cardioid directivity for a precise audio reproduction and higher intelligibility in highest broadcast quality even in noisy environments
• ActiveGard (on/off switch) for protected hearing against noise peaks greater than 110 dB
• Modular concept of different cables and boom arms to offer highest flexibility
• Cables of the cable 26-II series are compatible
• Swiveling ear cup (45° range) for single-sided listening
• Microphone can be worn either on right or left hand side
• Wide headband padding is included that converts the two-piece headband into a compact single piece

• Headphone:
  • Transducer Principle: Dynamic, closed
  • Ear Coupling: Cirumaural
  • Frequency Response: 8 Hz - 18 kHz
  • Impedance: 64 ohms
  • Power Rating: 500mW
  • Sensitivity: 112 dB SPL / 1 Vrms / 1 Khz Limiter off
  • Maximal SPL:
    • Limiter Off: 128 dB SPL @ 1 kHz
    • Limiter On: 110 dB SPL @ 1 kHz
  • Ambient Noise Reduction: < 32 dB passive ANR off respectively
  • Distortion: < 0.1% @ kHz, 100 dB SPL
  • Contact Pressure: Approx. 3.3 N
• Microphone:
  • Type: BKE 10-4
  • Transducer Principle: Pre-polarized condenser microphone
  • Directivity: Cardioid
  • Transmission Rate: 40 Hz - 20 kHz
  • Sensitivity: 16 mV/Pa @ 1 kHz
  • Maximum Sound Pressure Level: 150 dB SPL, 1 kHz, 0.5% THD
  • Interface: Phantom-powered P48
  • Power Supply: 12 V - 48 V
• General:
  • Ambient Temperature:
    • Operation: 5° to +131°F | -15° to +55°C
    • Storage: -67° to +158°F | -55° to +70°C
  • Weight: 8.5 oz | 240 g, without cable