Lectrosonics ALP650 Shark Fin/Log Periodic Dipole Array Antenna

Share

Skeletal design remote antenna with onboard amplifier ideal for long cable runs, phantom powered from Venue, UMC16 or Bias T. The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth. View technical data specific to this product.

Additional Specs:

• Pattern Gain: +7dBi (isotropic) | +4dBd (over dipole)
• Passband:
  ALP650L/E: 470-692 MHz
  ALP650M/E: 537-768 MHz
• RF Gain:
  +12 dB with 0dB attenuator
  +8 dB with 4dB attenuator
  +5 dB with 7dB attenuator
• Third Order Intercept: +27 dBm @ input (+41 dBm output)
• Power Requirements: 8V to 16V DC at the input jack; auto reset poly fuse protection circuit; constant power switching supply
  • 8V DC (125 to 145 mA)
  • 12V DC (83 to 106 mA)
  • 14.4V DC (69 to 89 mA)
  • 16V DC (60 to 80 mA)
• Phantom Powering: DC voltage supplied via coaxial cable by UMC16B, VRM input jack or BIAS-T power inserter (70 to 80 mA)
• Power Consumption: 1.2 Watt nominal (switching regulator)
• Weight: 12 oz.
• Dimensions: 12" H x 10.5" D x 1.5" W

CONSUMER ALERT: This particular wireless microphone device operates in portions of the 617-652 MHz or 663-698 MHz frequencies. Beginning in 2017, these frequencies are being transitioned by the Federal Communications Commission (FCC) to the 600 MHz service to meet increasing demand for wireless broadband services. Users of this device must cease operating on these frequencies no later than July 13, 2020. In addition, users of this device may be required to cease operations earlier than that date if their operations could cause harmful interference to a 600 MHz service licensee’s wireless operations on these frequencies. For more information, visit the FCC's wireless microphone website or call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC).