Categories

Accept Credit Cards

Shure SM87A Vocal Microphone

With $99 Purchase »
Your Price: $232.50
List Price: $279.00

MAP Pricing »

Availability: Out of Stock
Quantity:
Manufacturer:

Sales SKU: SHU87A
Product Code: SM87A

The Shure SM87A microphone is a professional-quality, handheld condenser microphone for use in sound reinforcement, broadcasting, and studio recording installations. Its supercardioid polar pattern provides greater rejection of unwanted sound sources, making it ideal for miking individual instruments in a multi-microphone setting or for miking single sources in a reverberant or noisy environment. An integral three-stage wind and pop filter protects against wind and breath noise. Its built-in shock mount reduces stand and handling noise.

Highlights:

  • Highly directional supercardioid pickup pattern
  • Controlled low-frequency roll-off
  • Very low RF and magnetic hum susceptibility
  • Minimally affected by varying load impedance
  • Built-in wind and pop filter
  • Transducer element shock mounted
  • Rugged construction for outstanding reliability
  • Field-usable over a wide range of temperature and humidity conditions
  • Accepts a wide variety of phantom power sources, including DIN 45 596 voltages of 11 and 52 Vdc
  • Type: Condenser (electret bias)
  • Frequency Response: 50 to 20,000 Hz
  • Polar Pattern: Supercardioid
  • Output Impedance: Rated at 150 ohms (100 ohms actual ± 20%)
    *Recommended minimum load impedance: 800 ohms
  • Sensitivity (at 1,000 Hz): Open Circuit Voltage, -52.5 dBV/Pa (2.4 mV)
    (1 Pa = 94 dB SPL)
  • Clipping Level (at 1,000 Hz): 1000 ohm Load, -6 dBV (0.5 V)
  • Maximum SPL (at 1,000 Hz): 140.5 dB (0.25% THD, 1000 ohm load)
  • Self-Noise (equivalent sound pressure level; measured with true rms voltmeter):
    24 dB typical, A-weighted
    26 dB typical, weighted per DIN 45 405
  • Dynamic Range: 116.5 dB (maximum SPL to A-weighted noise level)
  • Signal-to-Noise Ratio: 70 dB at 94 dB SPL (IEC 651)
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
  • Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3. Current Drain: 1.0 to 1.2 mA
  • Current Drain: 1.0 to 1.2 mA
  • Connector Type: Three-pin (XLR) professional audio
  • Weight: 7 oz | 200 g

Related Products

Copyright 2024 Location Sound Corp.