PSC FPELCDIN LiFE Battery Charger with 4-Pin DIN Connectors

Share

The PSC FPELBCDIN charger, equipped with a 4-pin DIN output connector, is specifically designed to recharge the FPSC0023LIFECP Pelican LiFE Battery with Integral Charging Port.

PSC FPELBCDIN - Features:

• Fast, 7.5 amp charge rate
• 2-stage charging characteristics
• Universal AC input for world-wide use
• Built-in active PFC function, PF>0.97
• Green certified, no load Power consumption < 0.5 watt
• 3-pole AC input, uses common IEC320-C14 power cable
• Built-in protection for short circuit, overload, over voltage, over temperature
• Cooling by free air convection
• Fully enclosed, engineered plastic case
• 2 Color LED indicator for charging status
• World-wide approvals: TUV, UL, PSE, CB, FCC, CE

• Input:
  • AC Input Voltage Range: 85 to 264 Vac
  • AC Input Frequency Range: 47 to 63 Hz
  • Power Factor Correction: PF>0.97 at 230 Vac, PF>0.99 at 115 Vac at full load
  • AC Input Current: 1.4A at 115 Vac, 0.7A at 230 Vac
• Output:
  • DC Output Voltage: 13.6 Vdc, typical
  • DC Output Current: 7.5 Amp
  • Rated Output Power: 102 watts
  • LED Indicator:
    • Constant Current Charging (High Rate): Red
    • Float Charging (Low Rate): Green
  • Standard Connector: 4-pin DIN, locking (Kycon KPP-4S or equivalent)
• Protection:
  • Overload: 90 to 110% at rated output power, CC limiting
  • Short Circuit: Hiccup Mode, automatic recovery after fault is removed
  • Over Voltage: 14 to 16.5V, shut down of output voltage
  • Over Temperature: 212° F | 100° C internal temperature, repower to reset
• Environmental:
  • Working Temperature Range: -22° to 158° F | -30° to +70° C)
  • Storage Temperature Range: -40° to 176° F | -40° to +85° C)