Genelec 7350A SAM Studio Subwoofer

Share

The Genelec 7350A SAM Studio Subwoofer provides outstanding monitoring accuracy and flexibility in a very small footprint.

Genelec 7350A SAM subwoofer is designed to complement both the 8320A and 8330A SAM monitors using the new and highly intuitive Genelec Loudspeaker Manager (GLM V2.0) control, complemented with a new measurement microphone and network adapter unit. It features Genelec Laminar Spiral Enclosure (LSE™) technology, providing low cut-off and clean articulated bass reproduction. Genelec state-of-the-art AutoCal™ allows to automatically align every monitor/subwoofer for level, timing, crossover phase and equalisation of room response anomalies.

Combining exceptional performance and flexibility, the 7350A is the subwoofer for music studios, post-production houses, digital edit suites, radio, TV and field broadcasting.

Genelec 7350A SAM Studio Subwoofer - Features:

• Patented Laminar Spiral Enclosure (LSE) design
• 8 inch woofer
• Genelec 150 W Class D amplification
• 5.1 balanced analog inputs and outputs (XLRs)
• AES/EBU digital input and output (XLRs)
• Networked via GLM V2.0 and CAT5 connections

• System Specifications:
  • Frequency Range:
    • ± 3 dB: 25 Hz to 150 Hz
    • -6 dB: 22 Hz to 160 Hz
  • Max. Short Term Sine Wave SPL Output Averaged From 30 To 85 Hz, Measured In Half Space @ 1m: ≥ 104 dB SPL
  • Self Generated Noise Level In Half Space @ 1m On Axis: < 5 dB (A-weighted)
  • Harmonic Distortion @ 90 dB SPL In Half Space @ 1m On Axis 30 to 85 Hz:
    • 2nd: ≤ 4%
    • 3rd: ≤ 1%
  • Physical:
    • Drivers (Magnetically Shielded): 8 in | 205 mm
    • Dimensions (H x W x D): 16 1/8 x 13 3/4 x 12 9/16 in | 410 x 350 x 319 mm
    • Weight: 42 lbs | 19 kg
• Signal Processing:
  • Subsonic Filter (18 dB/octave) Below: 20 Hz
  • LFE Cutoff Frequency: 150 Hz
  • Midband Rejection > 400 Hz: ≤ 50 dB
  • GLM Software Auto Cal Tools:
    • Parametric Notch Filters: 20
    • Delay Adjustment: 160 ms
    • Level Adjustment: 60 dB
• Amplifier Section:
  • Amplifier Short Term Output Power: 150 W
  • THD @ Nominal Output: ≤ 0.005%
  • Mains Voltage: 100, 120 or 230 V
  • Power Consumption (ISS Active / Idle / Max.): < 0.5 W / 8.5 W / 150 W
• Connections:
  • Analog:
    • Input/Output Connectors, XLR Female/Male: 5/5
    • LFE Input Connector, XLR Female: 1
    • Pin Sequence:
      • Pin 1: Gnd
      • Pin 2: + (non-inverting)
      • Pin 3: - (inverting)
    • Input Impedance: 10 kOhm balanced
    • Input Level For 100 dB SPL Output @ 1m: -6 dBu (variable in GLM software)
    • Output Gain: 0 dB
  • Digital:
    • Input/Output Connectors, XLR Female/Male: 1/1
    • Signal Format: AES/EBU single wire
    • Digital Audio:
      • Word Length: 16 to 24 bits
      • Sample Rate: 32 to 192 kHz
  • GLM Network:
    • Input/Output RJ45: 1/1