JK Audio Innkeeper 1rx Digital Hybrid - Rackmount

Share

This wouldn't be a JK Audio product without its fill of common-sense features. Through the front-panel headphone jack and volume control, you can monitor either the send signal, the caller's voice, or a mix of the two. This output is also sent to the rear panel screw terminals so you can easily add a monitor speaker.

In fact, several remote control connections can be found on real screw terminals for ease of installation. Three balanced audio connections: mic/line switchable XLR input, XLR caller output and an additional, user-defined XLR output.

The innkeeper 1x can be remote controlled by either the optional Guest Module 1, the RIU-IP remote interface, or the included RS-232 cable. The Guest Module 1 allows remote Call, Drop, and DTMF dialing while the RIU-IP allows control of all functions of the innkeeper 1x through your web browser whether it is directly connected to your computer or via the internet from around the world. The RS-232 cable allows similar control using simple ASCII commands.

Highlights:

• Excellent separation of caller and talent voice
• 16-bit DSP technology
• Proprietary auto null algorithm, 50 dB null
• Balanced XLR mic/line input
• Balanced XLR caller output
• Balanced XLR user-defined output
• Front-panel headphone jack
• Monitor speaker terminals on back
• Voice Presence Compensation
• Input/output LEDs
• Remote control screw terminals
• Remote control jack for Guest Module, RS-232 or optional IP remote
• Auto answer/disconnect
• AGC, Presence, Ducking, Tone Generator

• Input:
  • Balanced Female XLR:
    • Impedance: 1 k ohms
    • Level: 15 mV RMS (-34dBu) nom.
      Mic/Line Pad Switch: Line = +6 dBu max
• Output:
  • Balanced Male XLR, Caller Out/Mix Out 200
    • Impedance: 200 ohms
    • Level: 500 mV RMS (-4dBu) nom. +14 dBu max
• Headphone: 1/4" Stereo 8 ohms, 250 mW per channel
• Frequency Response: Telephone Side 200 Hz - 3600 Hz
• Phone Line Connector: RJ11C
• Speaker: Screw Terminals 8 ohms, 1 watt
• Universal AC Power Input: 120-240 VAC, 50-60 Hz
• Isolation: 1500 volts
• Ringer: 0.8B REN
• Size: 1.75 x 7.3 x 19 in | 4.5 x 18.6 x 48.3 cm
• Weight: 5.7 lbs | 2.6 kg