Accept Credit Cards

DPA d:fine FIOF00 Single-Ear Omnidirectional Headset Microphone, MicroDot - Beige

DPA d:fine FIOF00 Single-Ear Omnidirectional Headset Microphone, MicroDot - Beige DPA d:fine FIOF00 Single-Ear Omnidirectional Headset Microphone, MicroDot - Beige
With $75 Purchase »
Your Price: $599.95
List Price: $599.95

Availability: Usually Ships In 7 - 14 days

Rent For: $30.00/day

Product Code: FIOF00

NOTE: This specific DPA d:fine FIOF00 option is a single-ear mount headset in Beige with a 110 mm (4.3 in) boom. It comes standard with a MicroDot* connection.

DPA's d:fine Headset Microphones are ideal for singers, public speakers, actors, musicians and broadcast professionals. The single-ear mount headset has been ergonomically designed to easily fit any ear size and head shape while mounting on either the left or right side of the head.

The d:fine omnidirectional headset microphones are ideal for situations where a broad pickup pattern is essential and off-axis noise is not a problem. The omnidirectional microphone is generally not sensitive to wind, breathing or handling noise. Nevertheless, intensive protection against pop/wind noise is integrated in the microphone design. In addition, two the different-sized windscreens, included are a capsule protection cap, a cable clip which anchors the cable to your clothing, and a color-coded cable clip offering easy recognition of a specific headset.

Staying true to the DPA legacy, the d:fine offers accurate, natural voice intelligibility. Along with its very high SPL capabilities, one can both speak and sing with no hint of distortion.

A service connector splits the cable from the microphone boom and allows for quick exchange of cable lengths/colors/connectors and is valuable for servicing if a cable is damaged.

RENTAL NOTE: Our Rental Department offers a variation of this product. Please call or click on the "Request A Rental Quote" link to inquire.

*NOTE: The MicroDot connection requires a MicroDot Adapter to terminate the headset microphone to your wireless system. So that we may order them for you, view this list of DPA MicroDot Adapters to determine which one works for your wireless system.

  • Directional Characteristics: Omnidirectional
  • Principle of Operation: Pressure Gradient
  • Cartridge Type: Pre-polarized condenser
  • Frequency Range, ± 2 dB: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 15 kHz
  • Sensitivity, Nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent Noise Level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
  • Equivalent Noise Level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  • S/N Ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
  • Total Harmonic Distortion (THD): < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine
  • Dynamic Range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output Impedance: 30 - 40 ohm
  • Cable Drive Capability: Up to 984 ft or 300 m with DAD6001-BC XLR adapter
  • Output Balance Principle: Signal balanced with DAD6001-BC XLR adapter
  • Common Mode Rejection Ratio(CMRR): > 60dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
  • Power Supply (for full performance):
    • For Wireless Systems: Min. 5 V - max. 50 V through DPA adapter
    • With DAD6001-BC XLR Adapter: 48 V phantom power ± 4 V
  • Connector: MicroDot
  • Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
  • Operating Temperature Range: -40 °F to 113 °F | -40 °C to 45 °C
  • Electro Magnetic Compatibility (EMC): Fully compatible
  • Relative Humidity (RH): Up to 90%
  • Capsule Diameter: 0.2 in | 5.4 mm
  • Microphone Boom Length: 4.3 in | 100 mm
  • Microphone Head Size (H x W x D): 0.37 x 0.21 x 0.11 in | 9.5 x 5.3 x 2.9 mm
  • Cable Length: 4.3 ft | 1.3 m
  • Cable Diameter: 0.6 in | 1.6 mm
  • Weight:
    • Microphone Boom: 0.03 oz | 0.8 g
    • Earhook: 0.04 oz | 1.1 g
    • Cable: 0.23 oz | 6.6 g
    • Total: 0.30 oz | 8.5 g

Copyright 2018 Location Sound Corp.