Accept Credit Cards

Shure AXT630 Axient Antenna Distribution Amplifier

With $75 Purchase »
Your Price: $1,565.00
List Price: $1,956.00

MAP Pricing »
Availability: Usually Ships In 7 - 14 days

Rent For: $50.00/day

Product Code: AXT630US

Axient products are NOT available for purchase online. If you would like to place an order, please contact Val Asuncion at 818-980-9891 x353 or via email at

The AXT630 Axient Antenna Distribution Amplifier delivers ultra linear amplification and precision filtering for optimal performance in even the most difficult RF environments. The AXT630 features selectable 60 MHz input filters that match the available frequency bands of Axient transmitters, providing extra protection from strong out-of-band signals and a lower overall RF noise floor. Four BNC antenna output pairs distribute filtered signal to receivers, and an unfiltered RF cascade port is included to connect wideband devices like the Axient Spectrum Manager. Networkable via Ethernet connection, the AXT630 enables WWB6 control of filtering ranges, antenna power and attenuation.

RF Optimization

  • Ultra-linear distribution amp handles high signal levels without distortion.
  • Selectable input filtering provides system-wide protection against strong out-of-band signals.
  • Filter ranges are matched to Axient transmitter bands.
  • Wideband filtering option covers multiple bands.
  • Up to 15 dB selectable RF attenuation for signal-to-noise optimization.


  • Front panel interface and WWB6 control provides easy setup and control of filtering, antenna power and attenuation.
  • BNC outputs: 4 antenna output pairs.
  • Unfiltered RF cascade port with selectable 3 dB make-up gain for connecting wideband devices.
  • Ethernet networking: 2 PoE-enabled Ethernet ports.
  • IEC in/out power ports enable daisy-chaining of AC power.

CONSUMER ALERT: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at

  • RF Input:
    • Connector Type: BNC
    • Configuration: Unbalanced, active
    • Band Filters:
      • Wideband: 470–698 MHz
      • Band G1: 470–530 MHz
      • Band G1: 470–530 MHz
      • Band J5: 578–638 MHz
      • Band L3: 638–698 MHz
    • Impedance: 50 Ω
    • Bias Voltage: 12 V DC, 150 mA (300 mA maximum)
    • RF Frequency Range: 470–698 MHz
  • Distribution Output:
    • Connector Type: BNC (4 pairs)
    • Configuration: Unbalanced, active
    • Impedance: 50 Ω
    • Gain Adjustment Range:
      Cascade Enabled: -15 dB to 0 dB (in 1 dB steps)
      Cascade Disabled: -12 dB to +3 dB (in 1 dB steps)
    • Output Intercept Point: 25 dBm, typical
  • Cascade Output:
    • Connector Type: BNC (1 pair)
    • Configuration: Unbalanced, wideband
    • Impedance: 50 Ω
    • Insertion Loss: <5 dB
  • Networking:
    • Power Over Ethernet (PoE): 50 V DC, Class 1
    • Network Interface: Dual Port Ethernet 10/100 Mbps
    • Network Addressing Capability: DHCP or Manual IP address
  • Power Requirements: 100 to 240 V AC, 50/60 Hz
  • Current Drain: 1.0 A RMS (referenced at 120 V AC)
  • Dimensions (H x W X D): 1.7 x 19 x 14.4 in | 44 x 483 x 366 mm
  • Weight: 10.1 lbs | 4.6 kg

For additional technical specs about this product click here.

Related Products

Copyright 2018 Location Sound Corp.