Wisycom MRK16 16-Channel UItra-Wideband Wireless Rack Receiver System

Share

The Wisycom MRK16 is a modular wireless microphone receiver system that fits up 16 channels in a 19" 1RU chassis. The MRK16 accepts up to four MCR54 receivers, supporting multi-zone antenna
distribution, RF filtering and advanced audio routing (analog, AES3 and Dante) for a variety of requirements.

View the MRK16 up close.

Wisycom MRK16 Wireless Rack Receiver System - Features:

• Up to 16 true diversity channels in a compact 19" 1RU rack (4x MCR54)
• Ultra wideband receiver system from 470 to 1260 MHz equipped with 10 automatically selected band-pass filters
• RF Over Fiber for reception without distance limits! The fiber module EXP2 allows to replacement of coaxial cable and antennas located miles away
• Multiple audio outputs:
  - Digital (AES72 & AES59)
  - Dante (primary&secondary)
  - Analog (2x DB25 TASCAM wiring)
• Dual Area Matrix to select and combine 2 diversity zones. Antenna booster and remote control of Wisycom LFA/ADFA/BFA.
• Bluetooth 5 Long Range: Class 1 (100mW) remote control to connect Wisycom devices within a range of hundreds of meters.
• Daisy chain up to four racks for 64 channels in only 4U
• 5 ports manageable Gigabit Ethernet switch (ETH5 is connected to an internal SFP module for fiber data)
• Redundant (dual) power supply on XLR
• Dual Power Over Ethernet input and PoE output (PE1 optional)
• USB-C connectivity with powering (1.5A)

• Frequency Range: 470 - 1260 MHz (full range)
• Automatically Selected Band-Pass Filter:
  • 470 - 608 MHz
  • 470 - 694 MHz
  • 470 - 832 MHz
  • 470 - 1260 MHz
  • 510 - 608 MHz
  • 510 - 694 MHz
  • 510 - 832 MHz
  • 510 - 1260 MHz
  • 822 - 1260 MHz
  • 940 - 1260 MHz
• Antenna Connector: (4) BNC type female connectors for inputs, 2 x SMA type female connectors for loop
• Antenna Input Impedance: 50 Ohm
• Spurious Emissions: < 2 nW
• Input/Output Gain: 1dB ± 1
• Input/Cascade Gain: 1dB ± 1
• IP3: 14 dBm
• Antenna Booster Powering: +12 Vcc / 300 mA MAX
• Analog audio Output: (2) DB25 connectors (TASCAM)
• Digital Audio Output: AES59 (DB25 connector) and AES72 1M (2 RJ45 connectors)
• Dante Output: Dante Primary and Secondary (2 x 1000 Base TX RJ45 Ethernet)
• Monitor Output: Headphone 6.3 mm jack socket, volume adjustable with a front knob
• LED:
  • (4) LEDs indication for the zone activation status (red, green, off)
  • (4) LEDs indication for the booster status (red, green, off)
  • (4) LEDs indication for the power supply status (red, green, blue, off)
  • (1) LED indication for the MRK16 status (green, off)
• Max # of Receiver Slots: 4
• Max # of Channels: 16 (with MCR54), 8 (with MCR54-DUAL)
• Managing Interface: (2) 1000 Base TX RJ45 Ethernet, Bluetooth 5 Long Range, USB-C and thru display menu of the 1st receiver on the right
• Powering:
  10÷ 28 Vdc, 5A max, redundant DC Vdc1 and Vdc2 on XLR M-4pin
  1: -Vdc1
  2: +Vdc2
  3: -Vdc2
  4: +Vdc1
  PE1 Option: Power Over Ethernet Board:
  - Dual POE++ input on eth 2/4 (redundant pwr supply)
  - POE output on eth 1 (external Wifi, Bluetooth antenna)
• Power Consumption: 60W with 4 MCR54s and 4 active boosters
• Power Supply Output: on USB-C port to connect external device (e.g. tablet) 1.5 A max
• Temperature Range: -10 ÷ +55 °C
• Dimensions (H x W x D): 1.7 x 19 x 13.9 in | 44 x 483 x 352 mm
• Weight: 9.5 lb | 4.3 Kg with (4) MCR54 and EXP2 board, 7.3 lb | 3.30 Kg. without MCR54