JK Audio Daptor Two Wireless Phone Audio Interface

Share

Remote Broadcasts over a cell phone? Simply plug Daptor Two into the 2.5 mm headset jack of any wireless cell phone that accepts a third party headset or earpiece. You can now send and receive audio from your mixer or tape recorder through the cell phone.

Your cell phone will recognize Daptor Two as a headset which will disable the mic and speaker in the cell phone.

Audio Connections - You may use either the XLR input or 1/4" input, not both. The XLR input jack is disconnected when a cable is plugged into the 1/4" input jack. The same is true for the XLR and 1/4" output jacks.

Daptor Two was designed to take advantage of the increasing number of wireless phones that accept third party headsets and earpiece headsets. We've designed a circuit which emulates the electrical characteristics of these headsets. While some wireless phones have the 2.5 mm jack directly on the phone, others require a headset adapter which converts their proprietary connector into the 2.5mm jack. We do not provide this adapter.

• Input: Balanced Female XLR & Unbalanced 1/4" Mono
  • Impedance: 600 ohms
  • Level: 250 mV RMS
    (-10 dBu nom.)
    0 dBu max
• Output: Balanced Male XLR & Unbalanced 1/4" Mono
  • Impedance: 600 ohms
  • Level: 45 mV RMS
    (-25 dBu nom.)
    Mic Level
• Wireless Phone Interface: 36" cable provided with ¼ connector to 2.5mm 3-conductor headset plug
• Size: 4.4 x 2.5 x 1.2 in | 11.2 x 6.3 x 3 cm
• Weight: 7.0 oz | 198 g