DPA 4017C Compact Shotgun Microphone

Share

The DPA 4017C is an exceptionally short and lightweight interference tube microphone with high directionality. The tight polar pattern is very frequency linear and uniform. With the compact MMP-C pre-amp, booming applications such as in a car or in low ceiling rooms is uncomplicated. The total length of the microphone is 15.4 cm (6.1 in), weighs in at just 70 g (2.5 oz). The 4017C comes packaged with a foam windscreen and microphone clip.

DPA 4017C - Features:

• Excellent RF immunity
• Lightweight
• Uniform off-axis response
• Highly directional

• Directional Pattern: Supercardioid, lobe-shaped
• Principle of Operation: Pressure gradient, with interference tube
• Cartridge Type: Pre-polarized condenser
• Frequency Range: 20 Hz - 20 kHz
• Frequency Range, ± 2 dB, @ 60 cm: 40 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz
• Sensitivity, Nominal, ± 2 dB @ 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
• Equivalent Noise Level:
  • A-weighted: Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
  • ITU-R BS.468-4: Typ. 24 dB (max. 26 dB)
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 81 dB(A)
• Total Harmonic Distortion (THD): < 1 % up to 137 dB SPL peak
• Dynamic Range: Typ. 124 dB
• Max. SPL, Peak Before Clipping: 146 dB
• Output Impedance: 100 Ω
• Minimum Load Impedance: 2 kΩ
• Cable Drive Capability: 328 ft | 100 m
• Output Balance Principle: Impedance balancing with Active Drive
• Common Mode Rejection Ratio (CMRR): > 50 dB
• Power Supply (for full specifications): 48V Phantom power (± 4V)
• Current Consumption: 2.8 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Output Voltage: RMS: 4.5V
• Polarity: +V at pin 2 for positive sound pressure
• Temperature Range: -40° to 113° F | -40° to 45° C
• Relative Humidity (RH): Up to 90%
• Frequency Response: Yes
• Polar Plot: Yes
• Off-Axis Response: Yes
• Color: Matte black
• Dimensions (L x Diameter): 6.1 x 0.75 in | 154 x 19 mm
• Weight: 2.5 oz | 70 g