Deity Connect 2.4 GHz Wireless Microphone System

Share

The Deity Connect 2.4 GHz Wireless Microphone System consists of two BP-TX transmitters, one Duo-RX receiver, two lavaliers, antennas, cables, connectors, and a hard case.

The Deity Connect ecosystem uses a proprietary protocol that was engineered with several mechanisms to ensure a strong audio link while, at the same time, co-existing peacefully with other 2.4Ghz devices using the same frequency band.

The first mechanism is adaptive frequency hopping, automatically hopping before RF interference even happens. At any given time, the BP-TX is hopping between 9 different frequencies. The Deity Connect system is more than just a transmitter and a receiver link–it’s a bi-directional transceiver system that is always scanning and mapping out the whole 2.4Ghz frequency band, coordinating and planning the next 70 frequency hops.

The second mechanism used to prevent RF Interruption is called Listen-Before-Talk. If RF Interruption is detected or even thought to have taken place, the system will add the audio and data in the next two frequency hops after the ‘bad’ hop. The DUO-RX will then add that extra audio and data back into the stream as if the ‘bad’ never existed, giving you an uninterrupted stream of audio from your transmitter. Deity Connect uses the natural latency in the system as a buffer, allowing it to absorb ‘bad’ hops much like the CD Player Skip Protection feature but in a millisecond flash.

BP-TX

The BP-TX is made out of brushed aluminum to give it tough, durable build quality. The top of the unit features an SMA antenna connector, a 1/4” 20 mounting point for the belt clip, and a locking 3.5mm standard microphone input. With 2 multicolor LED alert lights, you will be able to tell the status at a glance. The daylight bright OLED display offers a fast refresh rate so VU meters bounce in real time. The high resolution of the OLED display allows for the status of all the major features to be displayed on the home screen.

The Transmitter RF power output is 100mw / 50mw / 25mw / 10mw/ or AUTO. When you set the BP-TX to AUTO RF Power the Deity Connect’s DUO-RX will transmit a pulse to the BP-TX (if the signal drops below the threshold), telling the BP-TX to increase its RF power output to help prevent a loss of signal. Using AUTO RF Power will also increase your battery life because you will never use more power than the system actually needs.

All settings on the BP-TX can be overwritten in the menu of the DUO-RX. You no longer have to walk to a talent to change a simple setting. Simply pull up which transmitter you need to adjust in the menu of the DUO-RX, make the change, and an instant the selected BP-TX updates to the new setting.

Features:

• Five different RF power options (Auto, 10mw, 25mw, 50mw, 100mw)
• SMA antenna port
• 24bit/48KHz uncompressed lossless audio
• Isolated track monitoring
• Featuring low cut, limiter, and high frequency boost to ensure great audio
• Multicolor status LED light
• Daylight bright OLED screen
• 2000mAh lithium battery with 10 hours of life and fully charged in < 1 hour
• Firmware upgradeable

DUO-RX

The Deity Connect system was designed to work with the ergonomics of a sound bag in mind. The DUO-RX was designed so that the screen, buttons, and antenna all face up in a sound bag so the operator does not need to remove it. And with the USB-C power and audio outputs on the bottom, the cable management can be maximized inside the audio bag. These two ergonomic features also allow for the screen to face camera operators when mounting it onto a camera, instead of facing the ceiling like other brands.

Features:

• Dual channel receiver
• Dual true diversity antennas
• Four different output mode sfor DSLRs and recorders
• Remotely control every setting on the transmitters from the receiver's menu
• 2000mAh lithium battery that recharges in < 1 hour
• Bundled with a waterproof hardcore
• Firmware upgradeable

Quad Antenna Design

Deity added dual SMA elbow antennas so no matter how you mount the DUO-RX, your external antenna can always be mounted vertically. But Deity took it a step further by adding two dipole internal horizontal antennas to capture signals on the horizontal plane. This quad design gives the system a dual true diversity setup across two receiver modules. This is the same method used in commercial grade WiFi and high-end drones. And because Deity offers users removable antennas, you can upgrade the antenna array yourself if you want to add a clover antenna, directional antenna, or even connect to a 2.4Ghz antenna splitter.

• BP-TX:
  • Channels: Up to 18 Channels
  • Frequency: 2.4GHz
  • Antenna: SMA
  • Range: up to 100 m | +300 ft
  • Audio Input Connectors: Locking 3.5mm TRS
  • Audio Delay: 19ms
  • Audio Distortion: ≤ 0.5%
  • Sampling Depth: 24 bit
  • Sampling Rate: 48 kHz
  • Limiter: Analog
  • Level Control: 21 to -51dB
  • Transmitting Power: Auto, 10mW, 25mW, 50mW, 100mW
  • Limiter: Analog
  • Low Cut: 75Hz / 150Hz
  • High Frequency Boost: 7kHz to 20kHz boost @ +1dB steps
  • Mute Switch: Yes
  • Display Type: 1.3" OLED Display
  • Battery Type: Lithium Ion Rechargeable Battery
  • Battery Life: ≥ 10 hours @ 100mw RF Output
  • Battery Recharge Time: < 1 hour via USB QuickCharge 2.0/3.0
  • Charging Interface: USB Type C
  • Mounting Options: 3/8" and 1/4" + removable belt clip
  • Dimensions: 3.7 x 2.5 x 1 in | 92.8 x 63 x 26 mm
  • Weight: 5.22 oz | 148 g, w/o antenna
• DUO-RX:
  • Channels: Up to 18 Channels
  • Frequency: 2.4GHz
  • Antenna: SMA
  • Antenna Array: Dual True Diversity
  • Receiving Sensitivity: -83/-86dBm
  • Audio Output Connector: Dual Locking 3.5mm TRS
  • Audio Delay: 19ms
  • Audio Distortion: ≤ 0.5%
  • Signal to Noise Ratio: ≥ 67dB
  • Frequency Response: 50 Hz - 20 KHz
  • Display Type: 1.3" OLED Display
  • Battery Type: Lithium Ion Rechargeable Battery
  • Battery Life: 10 hrs
  • Battery Recharge Time: 70 minutes via USB QuickCharge 2.0/3.0
  • Mounting Options: Cold shoe mount & velcro strap
  • Dimensions: 4.4 x 3.4 x 1.3 in | 113 x 87.4 x 33.5 mm
  • Weight: 8.75 oz | 248 g w/o antenna
• Lavalier:
  • Frequency Response: 50 Hz to 20 kHz
  • Directivity: Omnidirectional
  • Capsule Type: Pre-Polarized Condensor
  • Sensitivity: -40 ± 2dB re 1 V/Pa @ 1kHz
  • Dynamic Range: 110dB
  • Maximum Input: -40dB
  • Microphone Head Size (H x W x D): 0.76 x 0.41 x 0.41 in | 19.2 x 10.4 x 10.4 mm
  • Power Requirements: 1.5 to 3V
  • Cable Length: 5.2 ft | 1.6m