RODE NTG-2 Multi-Powered Condenser Shotgun Microphone

Share

The RODE NTG-2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.

Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.

In addition to the NTG-2 native 20 Hz - 20 kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The NTG-2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies.

The WSVM windshield is supplied to minimize light wind noise and plosives during recording.

• Acoustic Principle: Line gradient
• Active Electronics: JFET impedance convertor with balanced transformer output
• Capsule: 0.50"
• Polar Pattern: Supercardioid
• Address Type: End
• Frequency Range: 20Hz - 20kHz
• Output Impedance: 250 ohms
• Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1 k ohm load)
• Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1 k ohm load)
• Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Output: 3-pin XLR
• Power Options: (2) AA batteries or +48V phantom power
• Dimensions (H x W x D): 11 x .87 x .87 in | 280 x 22 x 22 mm
• Weight: .35 lbs | 161 g