Wisycom MCR54-DUAL True Diversity Receiver

Share

The Wisycom MCR54 DUAL True Diversity Receiver is a camera-mounted wireless microphone receiver system in a modular stand alone or slot configuration. Each receiver has a dedicated filter and can be tuned independently.

Wisycom MCR54 DUAL Receiver - Features:

• Two channels True Diversity receiver with independent tuning (4 receiver boards)
• Exceptional compactness and high robustness
• DSP analog and digital audio output (AES3)
• Up to 790 MHz bandwidth in 470/1260 MHz range
• Next Gen Multiband front-end filtering:
  • High Q electronically tunable filter in 470 - 800 MHz
  • 1st narrowband filter
  • 2nd narrowband filter
• Wideband and Narrowband DSP-FM operation (SW selectable):
  • Narrowband allows more 50% band efficiency
  • Narrowband allows about 3dB extra sensitivity and noise immunity
• Extreme low noise VCO with ultrafast spectrum scan for optimal quick and easy setup
• High contrast OLED display
• Automatic scan and transmitter programming through infrared and Bluetooth 5
• DSP-based for extreme flexibility and multi-companding operations
• Monitor and control through USB C or Bluetooth 5 on Wisycom Manager 2.0 (computer SW)
• Rear antenna connectors and micro audio and power adapter

• Frequency Range: 470 to 800 + 823 to 832 + 940 to 960 MHz (USA/EU)
• Switchable Channels: 2400 user programmable frequencies, organized in 40 groups of 60 channels
• Switching-Window: up to 790 MHz, each receiver can be tuned independently
• Frequencies: Microprocessor controlled frequency synthesizer circuit, with 5 kHz minimum step. The frequencies can be easily PC reprogrammed with USB C, Bluetooth 5 (long range) or optional UPKmini Programming
• Frequency Error: < ± 2.5 ppm, in the rated temperature range
• Modulation: FM mono, wideband or narrowband IFB (SW selectable)
• Peak Deviation: ±54 kHz (wideband), ± 40 kHz (narrowband)
• Antenna Input Impedance: 50 ohm SMA type (SWR < 1:2; typ. 1:1.4)
• Sensitivity: 2 μV ( 6 dBμV), for SND/N > 58 dB; 5 μV (14 dBμV), for SND/N > 98 dB
• Amplitude Response: < 0.5 dB (for RF input signal:6 dBµV ÷ 100 dBµV)
• Adjacent Chan. Selectivity: > 60 dB typical (for channel spacing ≥ 400 kHz in WB and ≥ 250 kHz in NB)
• Spurious Emissions: < 2 nW (typical = 0.1 pW)
• Noise Reduction System:
  • ENR / ENR-1.2 (Wisycom Extended-NR), noise optimized
  • ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized and with reduced pre-emphasis
  • ENS (for live application)
  • Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable.
• AF Bandwidth: 30 Hz to 20 kHz (wideband), 30 Hz to 17 kHz (narrowband)
• Frequency Response:
  • ± 1 dB in the 30 Hz to 20 kHz range (wideband)
  • ± 1 dB in the 30 Hz to 17 kHz (narrowband)
• Distortion: 0.3 % typical
• SND/D Ratio (Analog): 100 dB typical
• SND/D Ratio (Digital): > 125 dB typical
• Audio Output: Electronically balanced on 5 pin mini-XLR Female connector analogue or digital (SW selectable)
• Digital Sample Rate: AES3 @ 48 kHz
• Monitor Output: Headphone 3.5 mm jack socket
• Managing Interface: USB C, Bluetooth 5
• LEDs:
  • (2) multicolor RGB LEDs easily indicates Power and Bluetooth
  • (2) multicolor RGB LEDs easily indicates the audio status of the 4 RX
• Display: OLED 128 x 64 (white)
• Powering:
  • External = 6 to 18 Vdc (3 W max)
  • Autonomous = with optional BCA 54 Battery Module
• Power Consumption: 1.85 Watt max (with 2 active receivers), 1.5 Watt max (with 1 active receiver)
• Temperature Range: 14 to +131 °F | -10 to +55 °C
• Dimensions (H x W x D): 4.09 x 3.45 x 0.98 in | 104 x 87.6 x 25 mm
• Weight: 10.05 oz | 230 g