Wisycom MTP60-US-BT1 Bodypack Transmitter

Share

NOTE: This Wisycom MTP60-US-BT1 Bodypack Transmitter operates in the following frequency range:

470 to 608 MHz, max. power 100mW
614 to 663 MHz, max. power 20mW
940 to 960 MHz, max. power 100mW

Simultaneous recording and wireless transmission is not available on transmitters sold in the USA.

The Wisycom MTP60 Bodypack Transmitter is designed for professional wireless microphone applications.

Wisycom MTP60 Bodypack Transmitter - Features:

• The multi-band MTP60 currently has the widest tuning range of any wireless transmitter on the market (470 to 960 MHz)
• Monitor and control with Bluetooth via Wisycom Manager software or mobile device apps to adjust parameters in real time
• Dedicated hardware allows accurate real time position monitoring with advanced user interface
• Advanced linear technology (L20mW) eliminates intermodulation distortion for more robust signal
• Embedded recorder to record directly on the MTP60 memory card and integrated Linear Time Code decoding
• Enhanced robustness against self-interferences and antenna performances thru a proprietary "intermodulation cancellation" circuit
• An integrated haptic engine that gives tactile feedback with different vibration patterns
• FPGA-based signal processing allows easy switching between wide and narrow band operation
• Miniature design with flexible PCB (no connectors) for extended reliability
• ENS compander for a totally clear sound
• Powering with 2 x AA battery (Alkaline, NiMh, Lithium) or MPRLBP lithium battery (5.55 Wh)
• Bluetooth interface and mobile app allows full control from mobile or tablet
• Integrated low-pass audio filter eliminates ultrasonic interference from devices such as focus pullers
• Bluetooth 5 Long Range (Class 1, 100mW), with the MRK16 as a bridge, allows remote control the MTP60 over hundreds of meters
• Front panel buttons to quickly enter menu thanks to its multiple shortcut combinations
• Maximum input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
• 48V phantom power to use wired mic thru the PHA60 accessory

• Frequency Range:
  • 470 to 608 MHz, max. power 100mW
  • 614 to 663 MHz, max. power 20mW
  • 940 to 960 MHz, max. power 100mW
  Simultaneous recording and wireless transmission is not available on transmitters sold in the USA.
• Switchable Channels: 2400 user programmable frequencies, organized in 40 groups of 60 channels
• Frequencies: Quartz PLL frequency synthesizer circuit (5 kHz step)
• Frequency Error: ± 2.5 ppm, in the rated temperature range
• RF Power: switchable typ. 10mW/L10 W/ 20 mW/ L20 mW / 50 mW /100 mW
• Antenna Connector: LEMO-F 1 pin
• Modulation: Wideband/Narrowband FM, with digital audio conditioning (FPGA
• Nominal Deviation: ±40 kHz Wideband / ±25 kHz Narrowband
• Peak Deviation: ±56 kHz Wideband, ± 35 kHz Narrowband
• Spurious Emissions: < 2 nW
• Telemetry Feature: TX transmits a digitally modulated sub-carrier, suitable for tone-squelch operating, remote battery monitoring, optional PTT (push to talk) operation
• Noise Reduction System: ENS - Wisycom Extended-Sound Optimized
• AF Bandwidth: 45 Hz to 17 KHz (3dB) in Narrowband mode (NB), 45 Hz to 20 KHz (3dB) in Wideband mode (WB)
• Distortion: < 0.3 % (0.15 % typ.)
• SND/D Ratio (Analog):
  • typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband
  • typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation Narrowband
• Audio Input Connector: LEMO 3pin
• Audio Input Level: from -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps
• Maximum Input Level: +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
• Storage Media: Micro SD memory card (.wav files - BWF)
• Time Code: Linear time code decoding
• Bit Rate: 16 bit / 24 bit / 32 bit
• Sampling Rate: 48 kHz
• Managing Interface: Bluetooth 5 long range, USB-C, IrDA
• LEDs:
  • (2) RGB LEDs (Red, Green and Blue) for audio, RF and battery status
  • (1) LED for recording, 1 LED for battery charger
• Battery Lifetime Indication: Percentage or minute/second
• PTT Function: Pin 3 of the AF connector can be setup to an external push button
• Display: High contrast OLED white display (128 x 64 pixels)
• Power Supply: (2) AA battery (Alkaline, NiMh or Lithium), MPRLBP lithium (5.55 Wh)
• Power Consumption: 250mA@ 2.6V average (display off, 100mW power)
• Temperature Range: 14 to +131 °F | -10 to +55 °C
• Dimensions (H x W x D): 2.98 x 2.42 x 0.76 in | 75.7 x 61.4 x 19.4 mm, without clip
• Weight:
  • 6.5 oz | 183 g, with Lithium batteries
  • 4.9 oz | 140 g, without batteries