Sound Devices A10-RACK 4-Slot Wireless Enclosure

Share

The Sound Devices A10-RACK is a 4 slot, 8 channel, 1RU wireless microphone receiver enclosure, compatible with most unislot and SuperSlot™ receivers. The A10-RACK accepts up to 4 dual-channel slot-in receivers*, providing a total of 8 separate audio feeds. The A10-RACK provides high-quality antenna distribution, power distribution, up to 8 channels of analog and/or AES digital audio via XLR-M connectors and an 8 channel Dante audio interface.

Sound Devices A10-RACK - Features:

• Full Dante audio network integration for up to four Superslot compatible wireless mic receivers (eight audio channels), such as the A10-RX, as well as some models by Wisycom and Lectrosonics.
• Antenna distribution with bias power for active antennas and pass-through for a second A10-RACK for a total of 16 channels
• Power distribution via 4-pin XLR-M socket, 10-18VDC
• Analog or AES outputs via eight XLR-M sockets on rear panel
• Each receiver can be set to output analog or AES individually (if receiver supports it)
• Each receiver outputs analog or AES and Dante simultaneously
• Includes a secondary Ethernet port for Dante redundancy or daisy-chaining a second A10-RACK
• USB-B port for updating RX firmware via Mic2Wav app
• 470-694MHz front-end RF filter bandwidth
• 1RU chassis size with adjustable rack ears to set required depth

*The A10-RACK fits slot-in receivers with maximum dimensions of:

• Slot Height: 0.71 in | 18 mm
• Slot Width: 2.69 in | 68.3 mm
• Width Between SMAs: 3.32 in | 84.4 mm

View the A10-Rack up close: A-10 RACK front, A-10 RACK back

• Frequency Range: 470 to 694 MHz
• Number of Diversity Receivers: Up to 4
• Active Distribution Amplifier Bandwidth: 224 MHz, with phantom powering for active antennas, 12V, 200mA
• Antenna Inputs: 2 x BNC 50 Ohms
• Aux RF Outputs: 2 x BNC 50 Ohms
• Rack Powering: 10 - 18 Volts DC, 3 Amps via 4 pin XLR male socket
• Audio Outputs: 8 x 3 pin XLR-M analog and or AES
• Other Audio Outputs: 2 x RJ45 to provide Dante™ primary and secondary
• Output Level: +18 dBu maximum, transformer balanced (analog)
• Audio Frequency Response: 20 to 20,000 Hz ± 1 dB
• Service Port: USB type B
• Size: 1RU high 19-inch frame
• Dimensions (H x W x D): 17.4 x 8.3 x 1.8 in | 442 x 210 x 45 mm (without rack ears)
• Weight: 7.9 lb | 3.6 kg (without receivers)